AO2 Cubicle Ceiling Power Feed, 8-Wire, 4-Curcuit, Version 1, 12-Foot

Ceiling Power Feed for Power Pack End Location on Panel Version 1

Plugs into the end of a version 1 power pack

8 Wire, 4 Circuit. 3+1 system for OEM Power

12' long with partial MC Flex cable (the remaining distance needs to be conduit provided local to local code.

Fits Version 1 power in AO2®, Ethospace®, SQA® and similar products.

PLEASE NOTE: These products are a compatible aftermarket product that is produced in our own plants and is neither endorsed or recognized by the original manufacturer. These parts do not originate from the OEM.

PLEASE NOTE: This product must be hardwired to the building by a licensed electrician. This product requires 4 separate circuits to power all lines.

PLEASE NOTE: This product requires a power pole (sold separately) for almost all installation conditions, please consult local building codes.

• Ceiling power harness for Version 1 power
  
  MC flex cable for direct hard wire to building by a licensed electrician.
  Note: This product has MC flex cable partially up wire length, most electric codes will require a local electrician to add a connector and conduit to transition to the final length to the ceiling (this conduit should be provided locally in accordance with local code, it is not supplied with the product.)
  
  Metal construction.
  8 wire
  4 circuit (3+1, 3 shared, 1 dedicated)
  
  
  Fits:
  
  
  • Version 1 power systems (AO2) 8 wire systems.
  
  Includes Connector and partial mc flex cable for direct wire to building power supply by a licensed electrician. Note: additional conduit and connector will be required by the local building code and will need to be supplied by the electrician.
  
  Compatible with version 1 power system
  
  Nominal length is 144"
  
  Part mounts to spring loaded receptacle clip on the end of power pack. Hard wire other end to building power with a licensed electrician.
  
  Note: This part is an aftermarket part. We are not affiliated with the original manufacture, registered and trademark names are for identification of purpose only, these parts originate from aftermarket manufacturing sources.
  
  PLEASE NOTE: This product must be hardwired to the building by a licensed electrician. This product requires 4 separate circuits to power all lines.
  
  
  

The trademarks, service marks or registered trademarks are those of their respective owners.

The parts on this site are made by or for OmniMax USA LLC.

OmniMax USA LLC and Omnipart Import Export Limited are the sole producers of these parts, any references used here are for the sole purpose of identifying usage and application.

These parts do not originate from the original OEM manufactures unless specifically identified as such.

Action Office®, Series 1®, Series 2®, Ethospace®, SQA®, Phoenix Design®, AsNew® are all trademarks of Herman Miller, Inc.

Compatico® is a registered trademark of Compatico, Inc.

Friant® is a registered trademark of Friant Inc.

Open Plan Systems® and HMU® are registered trademarks of Open Plan Systems, Inc.

Unisource, Mirage® and Mirage VS® are registered trademarks of Unisource Office Furniture Parts, Inc.

All parts and products listed on this website originate from aftermarket manufacturers. Any reference to a specific manufacturer or trademark is only for the purposes of identify application for the part. No parts sold on this website originate from the original manufacturer.