67"H AO2 or 62"H AO1 Cubicle Connector Metal End Trim, 61-Inch, Medium TonePre assembled metal end cap for 67" H.
For use with AO2 system, can also be used on AO1 (62")
Includes, Metal end cap, mounting blocks.
PLEASE NOTE: This part does not include the raceway trim cap which is needed to finish the 67"H AO2 end. This part is HMP05-xx and is sold separately.
Medium Tone paint
- Specifications:
End Cap Trim Metal
For Finished Ends of panels.
This is a ready to install connector for use with AO1 or AO2 panels.
The end cap is assembled (except lower trim cover which is sold separately and installed on site).
includes the connector tube painted, top and bottom blocks, top trim cap, base stem (for AO2), base two way trim (for AO2). Does not include AO1 trim (not available).
Overall height is 67" nominal, actual height is 61" (for AO1 applications 62" nominal and 61" actual).
Width is 1 7/8"
Base trim is 5" overall height (nominal). NOTE: This items is sold separately (HMP05-xx).
Approximate top dimension is 2.75" x 2.75" on the center of the block.
End Cap is extruded aluminum with cast metal top and bottom blocks with powder coated finish.
NOTE: Base trim is sold separately (HMP05.xx)
Top and Bottom blocks are die cast metal powder coated.
The trademarks, service marks or registered trademarks are those of their respective owners.
The parts on this site are made by or for OmniMax USA LLC.
OmniMax USA LLC and Omnipart Import Export Limited are the sole producers of these parts, any references used here are for the sole purpose of identifying usage and application.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Action Office®, Series 1®, Series 2®, Ethospace®, SQA®, Phoenix Design®, AsNew® are all trademarks of Herman Miller, Inc.
|