AO2 This Cubicle Base Power Feed, 8-Wire, 4-Curcuit, Left Hand, 6-FootPower Base Feed for Receptacle Location on Panel or Ethos Frame.
Left Hand Feed (as you are facing the panel the unit plugs into the left hand receptacle and feeds to the left.)
8 Wire, 4 Circuit. 3+1 system for OEM Power
6' long seal tight cable
Fits power in AO2®, Ethospace®, SQA® and similar products.
PLEASE NOTE: These products are a compatible aftermarket product that is produced in our own plants and is neither endorsed or recognized by the original manufacturer. These parts do not originate from the OEM.
PLEASE NOTE: This product must be hardwired to the building by a licensed electrician. This product requires 4 separate circuits to power all lines.
- Base power harness for AO2 panel LEFT HAND FEED
Seal tight cable for direct hard wire to building by a licensed electrician.
Metal construction.
8 wire
4 circuit (3+1, 3 shared, 1 dedicated)
Feed direction is left hand. As you are facing the panel or frame, this product plugs into a receptacle location on the left hand side of the panel or frame and the whip feeds to the left.
Fits:
- AO2
- Ethospace
- Phoenix Design AO2
- SQA AO2
Includes Connector and Seal Tight (Liquid tight) cable for direct wire to building power supply by a licensed electrician.
Compatible with current version OEM power system
Nominal length is 72"
Weight 5.5 Lbs.
Part mounts to spring loaded receptacle clip on side of power pack. Hard wire other end to building power with a licensed electrician.
Note: This part is an aftermarket part. We are not affiliated with the original manufacture, registered and trademark names are for identification of purpose only, these parts originate from aftermarket manufacturing sources.
PLEASE NOTE: This product must be hardwired to the building by a licensed electrician. This product requires 4 separate circuits to power all lines.
The trademarks, service marks or registered trademarks are those of their respective owners.
The parts on this site are made by or for OmniMax USA LLC.
OmniMax USA LLC and Omnipart Import Export Limited are the sole producers of these parts, any references used here are for the sole purpose of identifying usage and application.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Action Office®, Series 1®, Series 2®, Ethospace®, SQA®, Phoenix Design®, AsNew® are all trademarks of Herman Miller, Inc.
Compatico® is a registered trademark of Compatico, Inc.
Friant® is a registered trademark of Friant Inc.
Open Plan Systems® and HMU® are registered trademarks of Open Plan Systems, Inc.
Unisource, Mirage® and Mirage VS® are registered trademarks of Unisource Office Furniture Parts, Inc.
All parts and products listed on this website originate from aftermarket manufacturers. Any reference to a specific manufacturer or trademark is only for the purposes of identify application for the part. No parts sold on this website originate from the original manufacturer.
|