14"H X 48"W Tackable Insert for Panel Blank for AO1 and AO2Panel Insert Blank (Core) Tackable
Raw, insert core for use with A01 or A02 panels
14"h x 48"w
Ready for fabric application and assembly.
PET Tackable Face, Honeycomb construction, hollow core with mounting slots for top cap.
Please note, this can only be installed with one piece hanger frame (HMS03-04-xx)
This is to be placed on top of another panel assembly using a splice plate and one piece hanger frame at finished height.
This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.
For more info go to www.P65Warnings.ca.gov
- Specifications:
This is a raw panel tackable insert sized and designed for use with A01 and A02 style panel assemblies.
This product requires, top cap, hanger frame, base components, main panel core fabric, mounting hardware, raceway covers and power (if required).
All sold separately and are not included with this item.
Product is sized one inch under nominal size to fit standard OEM style A01 or A02 hardware.
Actual size is 14"h x 47"w.
Construction is honeycomb core design.
OSB side, top and bottom rails
PET Tackable face and honeycomb interior
Must be used with one piece complex hanger frame, this will not work with wedge blocks. .
Top is pre-slotted for use with plastic or metal top cap.
Designed to be fabric covered (not included).
The trademarks, service marks or registered trademarks are those of their respective owners.
The parts on this site are made by or for OmniMax USA LLC.
OmniMax USA LLC and Omnipart Import Export Limited are the sole producers of these parts, any references used here are for the sole purpose of identifying usage and application.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Action Office®, Series 1®, Series 2®, Ethospace®, SQA®, Phoenix Design®, AsNew® are all trademarks of Herman Miller, Inc.
|