 |
 |
 |
|
Worksurface Top
Laminate TFL top for cubicles, benching, desking, training, meeting applications
US made tops at a price point that works in today's environment.
Industrial particle board center, 2mm PVC textured banding all 4 sides.
24" x 36" x 1 1/8" Top Size
White and Folkstone Finish (top and bottom)
No boring
- Specifications:
Laminate is two sided finished on both sides with 2mm PVC Edge band
Color side 1: #11 White
Cross Reference colors: Wilsonart D248/1573, Formica 949/7197, Nevamar S-7-36, Pionite SW80
Color side 2: #108 Folkstone
Cross Reference colors: Wilsonart D381, Formica 927, Nevamar S-6-37, Pionite SG241 PVC Band: 2mm Black Textured
This is a US produced worksurface top and designed for use with cubicles desking benching and meeting table assemblies.
Top TFL Laminate 24" x 36" x 1 1/8" Thick
44# Density US Made industrial particle board core
2mm PVC End Band Textured
Tested and past UL Fire rating for applicable products (2018) in cubicles
Size is actual size (see drawing)
NO BORING
US Manufactured
TECHNICAL SPECIFICATION:
Manufacturer's Certification:
Materials comply with specified requirements and suitable for intended application.
1. Material Certificates: Thermally Fused Laminate - Particleboard
a. CARB Compliance: Phase 2 formaldehyde emissions certificate; CA Executive Order for CARB ULEF or NAF Exemption.
b. CPA - ECC Certification.
c. FSC Certification.
Sustainable Design Submittals - LEED 2009 (NC) or LEED v4 New Construction:
1. - Materials and Resources - Recycled Content (LEED 2009, MRc4) (LEED
- v4, Building product disclosure and optimization - sourcing of raw
- materials) - TFL particleboard or MDF manufacturer's product data
- indicating percent of pre-consumer and post-consumer recycled content.
2. - Materials and Resources - Regional Materials (LEED 2009, MRc5) (LEED
- v4, Building product disclosure and optimization) - TFL particleboard
- or MDF manufacturer's product data indicating harvest source location
- and location of manufacturing. Location valuation factor.
3. - Materials and Resources - Certified Wood (LEED 2009, MRc7) (LEED v4,
- Building product disclosure and optimization - sourcing of raw
- materials) - TFL particleboard or MDF manufacturer's product data
- indicating certification to Forest Stewardship Council. Product must be
- ordered as FSC Chain of Custody Certified.
4. Indoor Environmental - Quality Credit - (LEED 2009, IEQc4.4) (LEED v4, Low-Emitting Materials -
- Composite Wood Evaluation) - TFL particleboard or MDF manufacturer's
- product data documenting low formaldehyde emissions that meet the CARB
- ATCM for ultra-low-emitting formaldehyde (ULEF) resins or no added
- formaldehyde (NAF) resins.
Physical characteristics:
1) Wear Resistance per NEMA LD3-3.13:
a) Solid Colors: 550-700 cycles.
b) Prints: 100 cycles.
2) Stain Resistance per NEMA LD3-3.4:
a) 1-10 No effect.
b) 11-15 Slight - moderate effect (iodine only).
3) Impact Resistance per NEMA LD3-3.8:
a) 9 to 15 in (229 to 381 mm).
The trademarks, service marks or registered trademarks are those of their respective owners.
The parts on this site are made by or for OmniMax USA LLC.
OmniMax USA LLC and Omnipart Import Export Limited are the sole producers of these parts, any references used here are for the sole purpose of identifying usage and application.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Action Office®, Series 1®, Series 2®, Ethospace®, SQA®, Phoenix Design®, AsNew® are all trademarks of Herman Miller, Inc.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- US Manufactured
Manufacturer's Certification: Materials comply with specified requirements and suitable for intended application.
1. Material Certificates: Thermally Fused Laminate - Particleboard
a. CARB Compliance: Phase 2 formaldehyde emissions certificate; CA Executive Order for CARB ULEF or NAF Exemption.
b. CPA - ECC Certification.
c. FSC Certification.
Sustainable Design Submittals - LEED 2009 (NC) or LEED v4 New Construction:
1. Materials and Resources - Recycled Content (LEED 2009, MRc4) (LEED v4, Building product disclosure and optimization - sourcing of raw materials) - TFL particleboard or MDF manufacturer's product data indicating percent of pre-consumer and post-consumer recycled content.
2. Materials and Resources - Regional Materials (LEED 2009, MRc5) (LEED v4, Building product disclosure and optimization) - TFL particleboard or MDF manufacturer's product data indicating harvest source location and location of manufacturing. Location valuation factor.
3. Materials and Resources - Certified Wood (LEED 2009, MRc7) (LEED v4, Building product disclosure and optimization - sourcing of raw materials) - TFL particleboard or MDF manufacturer's product data indicating certification to Forest Stewardship Council. Product must be ordered as FSC Chain of Custody Certified.
4. Indoor Environmental Quality Credit - (LEED 2009, IEQc4.4) (LEED v4, Low-Emitting Materials - Composite Wood Evaluation) - TFL particleboard or MDF manufacturer's product data documenting low formaldehyde emissions that meet the CARB ATCM for ultra-low-emitting formaldehyde (ULEF) resins or no added formaldehyde (NAF) resins.
Physical characteristics:
1) Wear Resistance per NEMA LD3-3.13:
a) Solid Colors: 550-700 cycles.
b) Prints: 100 cycles.
2) Stain Resistance per NEMA LD3-3.4:
a) 1-10 No effect.
b) 11-15 Slight - moderate effect (iodine only).
3) Impact Resistance per NEMA LD3-3.8:
a) 9 to 15 in (229 to 381 mm).
|
|
|
|
|
|
|